Nortel-networks NN10265-111 Manual de usuario descargar pdf (Pagina 86)

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006

to allow I/O blades to boot and mount their file systems over the

network.

The complete base system can be installed in approximately 30

minutes.

IMPORTANT: The installation procedures must be followed separately

for each side if two Portals are installed in the same chassis.

The following is required for an installation:

• Chassis and peripherals

— One Motorola CPX8216T high availability compact PCI which is

divided into two domains (A and B), each running independent

media portals.

— One SCSI hard drive per domain, minimum 40Gb.

— One SCSI CD-ROM per domain.

— One 3.5” floppy drive per domain.

— One Motorola CPX8216T HSC/BR hot swap controller per

domain.

• Host Blade

— One Motorola CPV5370 per domain.

— One Motorola 5370 transition module per domain.

• I/O Blades

— Up to six MCPN765 per domain.

— One PIMC-0101 transition module for each MCPN 765.

• Other hardware

— VT100-compatible terminal device for console access to the host

and I/O blades.

• Base software

— Red Hat 6.2 installation CD (disc 1)

— RTP Media Portal installation CD

• Required information

— IP address information: one address per host blade and one or

two media addresses per I/O blade.

— IP address(es) of timeservers.

— MAC (ethernet) addresses of all I/O blades (two addresses per

blade). Addresses can be found on labels affixed to the blade or

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 117 118

Sin comentarios

Nortel-networks NN10265-111 Manual de usuario Pagina 86