Nortel Networks 21 PCI 10/100 Manual de usuario descargar pdf (Pagina 22)

Installation and Reference for the BayStack 21 PCI 10/100 Adapter w/WOL

1-4

206379-A

Table 1-1 describes the Link and Activity LED indications.

WOL Cable and Connector

The WOL cable (Figure 1-2

) is an interconnect cable with standard 3-pin

connectors on each end.

Figure 1-2. WOL Cable

The WOL cable includes the following three wires:

• A network card auxiliary power supply line, which maintains constant

low-level power to the motherboard

• A card wake-up signal line, which turns on the workstation remotely

• A ground line, which provides electrical grounding

Table 1-1. LED Indications

Label Color Activity Description

10 LNK Green On A 10 Mb/s connection has been established.

Off Power is not supplied to the network card, or a 10 Mb/s

connection is not established.

100 LNK Green On A 100 Mb/s connection has been established.

Off Power is not supplied to the network card, or a 100 Mb/s

connection is not established.

ACT Green On Heavy network traffic is passing through the port.

Blinking Intermittent or light network traffic is passing through the port.

The rate of blinking is proportional to the amount of network

traffic.

9461FA

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 73 74

Sin comentarios

Nortel Networks 21 PCI 10/100 Manual de usuario Pagina 22