Nortel Networks 703t Manual de usuario descargar pdf (Pagina 35)

October 2006 Preinstallation requirements

703t Server Hardware Installation 35

5 Place the 703t server in the chosen location (see page 48). ❒

6 Set the DIP switches on the modem (see page 51). ❒

7 Connect the 703t server and devices as follows:

 Connect the monitor, keyboard, and mouse (see page 55). ❒

 Connect the modem (see page 55). ❒

 Connect the 703t server to the ELAN hub (see page 58).

ATTENTION

To comply with EMC requirements, a Class A hub must be

located 10 m (33 ft.) away from the 703t server.

❒

Note: If you are connecting the optional CLAN, do not power

up unless your antivirus programs and Nortel security updates

are installed first.

 Connect the 703t server to the CLAN hub (optional); (see

page 60).

ATTENTION

To comply with EMC requirements, a Class A hub must be

located 10 m (33 ft.) away from the 703t server.

❒

 Install the software feature dongle (see page 61). ❒

 Connect the power cords for all devices, and then power

them up (see page 63).

❒

8 Start the 703t server (see page 65). ❒

Step Description Check

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

Sin comentarios

Nortel Networks 703t Manual de usuario Pagina 35