Nortel Networks 214393-A Manual de usuario descargar pdf (Pagina 135)

Chapter 8 RMON 135

Reference for the BayStack 380-24F Gigabit Switch Management Software

2 In the variable field, select a variable for the alarm from the list and a port (or

other ID) on which you want to set an alarm (Figure 68).

Figure 68 Alarm variable list

Alarm variables are in three formats, depending on the type:

• A chassis alarm ends in .x where the x index is hard-coded. No further

information is required.

• A card, spanning tree group (STG) or EtherStat alarm ends with a dot (.).

You must enter a card number, STG ID, IP address, or EtherStat

information.

• A port alarm ends with no dot or index and requires using the port

shortcut menu. An example of a port alarm would be ifInOctets (interface

incoming octet count).

For this example, select Bridge > dot1dStpTopChanges.0 from the

variable list. This example is a chassis alarm, indicated by the “.0” in the

variable.

3 For this example, select a rising value of 4 and a falling value of 0.

4 Leave the remaining fields at their default values, including a sample type of

Delta.Click Insert.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 163 164

Sin comentarios

Nortel Networks 214393-A Manual de usuario Pagina 135