Nortel Networks Contivity1510D Manual de usuario descargar pdf (Pagina 35)

Chapter 1 Introduction 35

Reference for the Contivity VPN Switch Command Line Interface

User Exec Mode

This is the initial command mode when the administrator first establishes a Telnet

connection to the switch. It is also called Exec mode.

This is a limited display mode. You cannot modify configuration parameters or

view the configuration file.

User Exec Mode prompt

CES>

User Exec Mode commands

The following table summarizes the User Exec Mode commands.

Table 1 CLI Modes, Prompts and Access

Mode Prompt Access

User Exec Mode CES> Login via

Telnet

with

administrator name

and

password

Privileged Exec Mode CES# Enter the command

enable

at the User Exec

Mode prompt.

Global Config Mode

CES(config)#

Enter the command

configure terminal

the Privileged Exec Mode prompt.

Table 2 User Exec Mode Commands

Command Description

clear ip route Remove a route from the route table

enable Enable privileged commands

exit Exit the Telnet session

help Display message about using help

ping Send ping message to a destination

show file systems List available file systems

show flash: contents Display flash settings

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 221 222

Sin comentarios

Nortel Networks Contivity1510D Manual de usuario Pagina 35