Nortel-networks CALLPILOT 555-7101-217 Manual de usuario descargar pdf (Pagina 35)

May 2003 Preparing for installation

Part 2: 1001rp Server Hardware Installation 35

Inspecting the server interior

Introduction

You should perform a visual inspection for loose components, foreign

matter, or shipping damage inside the server.

To inspect the server interior

1 Carefully check all the cards to ensure they are fully seated on the

baseboard.

2 Check for any loose wires or foreign objects, such as loose screws,

inside the chassis.

3 Review the slot locations (see “Slot definition and slot numbering” on

page 14).

4 Do one of the following:

CAUTION

Risk of equipment damage

When working with interior components, use an ESD wrist

strap to protect static-sensitive components.

IF THEN

you observe any damage contact your Nortel Networks

technical support representative.

components have become

loose

secure them.

Refer to the procedures in Part 5 of

the CallPilot Installation and

Configuration binder.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Sin comentarios

Nortel-networks CALLPILOT 555-7101-217 Manual de usuario Pagina 35