Nortel-networks CALLPILOT 555-7101-217 Manual de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
Installing the server and connecting the peripheral devices Standard 1.0
70 CallPilot
To connect the 1001rp AC server to power
1 Plug the servers AC power cord into the servers rear panel.
2 Plug the other end of the servers AC power cord into a properly
grounded power outlet or power bar.
.
CAUTION
Risk of personal injury and hardware failure
The power outlets that are used by the CallPilot server and its
peripheral devices must be connected to the same single-point
ground reference as the one used by the Meridian 1 switch or
Succession CSE 1000 system. If this requirement is not met,
power transients can cause personal injury and/or hardware
failure.
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 79 80

Comentarios a estos manuales

Sin comentarios