Nortel Networks V100 Manual de usuario descargar pdf (Pagina 171)

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide

171

Type the number of your choice and press Return:

Select 2 and press Enter.

7 See the instructions for installing Disk 1 in this document for

more information on what to enter for the following items:

• Networked

•DHCP

• Primary Network Interface

• Hostname (You may have to backspace over the word

"unknown" and type in the correct name.)

• IP Address

• Subnet

•Netmask

•iPV6

•Confirm

• Security Policy

•Confirm

Note: This procedure skips some of the steps for initial

installation of CD1.

• Regions

• Time Zone

• Date & Time

•Confirm

• Password

You will then see System identification is completed.

The system reboots. You can log back in as root.

8 At the MgmtSvr, you will see the following message:

You are now configuring the NTP time source for

this server. The servers which run the

Management and Accounting service will be the

source. You will need to provide the Machine

Logical IP Address of each server. If running

simplex mode, provide the same address twice.

Press the Enter Key to Continue --

1 2 ... 166 167 168 169 170 171 172 173 174 175 176

Sin comentarios

Nortel Networks V100 Manual de usuario Pagina 171