Nortel Networks NN43001-106 Manual de usuario descargar pdf (Pagina 605)

100

101

Feature operation 605

Prompt Response Description

TN Terminal number

l s c u Format for Large System and CS 1000E system,

where l = loop, s = shelf, c = card, u = unit.

Format for Small System and Media Gateway 1000B where

c = card and u = unit.

KEY xx COS Key number for CCOS controller key on attendant console.

xx = key number (must be greater than 1).

Feature operation

To activate Enhanced Controlled Class of Service (ECCS) from a Meridian 1

proprietary telephone with the feature currently inactive, follow these steps:

Step Action

Press CCOS to begin the activation sequence.

Note that this is a toggle: if CCOS is already active, pressing the key

will change the CCOS state to inactive. Check the CCOS lamp to

determine if CCOS is already active.

Dial the PDN of the telephone to be changed and press CCOS. The

controlling telephone’s display, if equipped, shows the DN of the

changed telephone and a 0 (zero).

To select ECC1, dial # 1.

Note that the octothorpe (#) is required. The controlling telephone’s

display, if equipped, shows the DN of the changed telephone and a 1.

To select ECC2, dial # 2.

Note that the octothorpe (#) is required. The controlling telephone’s

display, if equipped, shows the DN of the changed telephone and a 2.

Press Rls.

—End—

To activate ECCS from an attendant console, follow these steps:

Step Action

Select an idle loop key.

Press CCOS.

Nortel Communication Server 1000

Features and Services Fundamentals — Book 2 of 6 (C)

NN43001-106 02.04 Standard

Release 5.5 9 May 2008

1 2 ... 600 601 602 603 604 605 606 607 608 609 610 ... 615 616

Comentarios a estos manuales

Sin comentarios

Nortel Networks NN43001-106 Manual de usuario Pagina 605

Comentarios a estos manuales

Relacionado con productos y manuales para Software Nortel Networks NN43001-106