Nortel Networks NN46120-104 Manual de usuario descargar pdf (Pagina 57)

Complete the Join Setup 57

or more VPN Gateways to a cluster that already contains four

master NVGs, each additional NVG is automatically configured

as slave.

It is recommended that there are 2-4 master NVGs in each

cluster, so in most cases there is no need to change the

default setting. If needed, you can always reconfigure a VPN

Gateway by changing the Type setting after the initial setup.

For more information, see the

type command in the "iSD

Host Configuration" section under Configuration Menu>System

Configuration in the Command Reference.

Enter the type of this iSD (master/slave) [master]:

......ok

3 Wait until the Setup utility has finished.

Setup successful.

The setup is now finished. The VPN Gateway that has been

joined to the cluster will automatically pick up all configuration

data from one of the already installed NVG(s) in the cluster. After

a short while you will get a login prompt.

If needed, you can now continue with the configuration of the

NVG cluster using the Command Line Interface (CLI) or the

Browser-Based Management Interface (BBI). Log in as the

admin user.

For more information about the CLI, see “The Command Line

Interface” (page 135).

For more information about the BBI, see the SSL VPN BBI Quick

Guide.

--End--

Nortel VPN Gateway

User Guide

NN46120-104 02.01 Standard

14 April 2008

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 299 300

Sin comentarios

Nortel Networks NN46120-104 Manual de usuario Pagina 57