Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Manual de usuario descargar pdf (Pagina 37)

Chapter 2 Cabling the VPN Router and turning the power on 37

Nortel VPN Router Installation — VPN Router 2700

Figure 7 shows the back of the VPN Router 2700. All interface cables and the

power cord attach to the rear of the gateway.

Figure 7 Rear view of the VPN Router 2700

Connect the interface cables to the VPN Router 2700 in this order:

1 Connect the 10/100BASE-TX RJ-45 cable to the built-in 10/100BASE-TX

Ethernet LAN port on the gateway (Figure 7).

2 If you plan to connect a terminal or PC to the gateway, connect the serial cable

shipped with the VPN Router 2700 to the serial port (Figure 7).

3 Connect all other cables to the ports on the installed interface cards.

If you ordered optional interface cards, connect the cables for these interfaces

to the ports.

CS260002A

100-2240VAC

2-1A

50-60Hz

Power Reset

Serial

LAN

1234

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 107 108

Sin comentarios

Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Manual de usuario Pagina 37