Nortel-networks WEB OS 212777 Manual de usuario Pagina 274

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 482
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 273
Web OS 10.0 Application Guide
274
Chapter 11: High Availability
212777-A, February 2002
3. Scroll to the bottom of the text file and delete anything past Script End.
4. Save the changes to the text file as Customer Name Switch 2.
Move your serial cable to the console port on the second switch. Any configuration on it needs
to be deleted by resetting it to factory settings, using the following command:
You can tell if the switch is at factory default when you log on because the switch will prompt
you if you want to use the step-by-step configuration process. When it does, respond: No.
5. In HyperTerminal, go to transfer/send text file and send the Switch 2 text file. The configu-
ration will dump into the switch. Simply type apply, then save. When you can type charac-
ters in the terminal session again, reboot the switch (/boot/reset).
>> Main# /boot/conf factory/reset
Vista de pagina 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 481 482

Comentarios a estos manuales

Sin comentarios