Nortel Networks NN43001-321 Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 110
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
CS 1000 SIP configuration and UDP location dialing 59
Figure 15
SIP CD Services
5
Enter the necessary information in the following fields:
a. Service Enabled: Select whether the Converged Desktop
Service application is enabled or disabled for this node. CDS is
enabled by default (the check box is selected).
Note: If CDS is not enabled, no calls are sent to the MCS
5100, including both originating and terminating calls either
to or from the Converged Desktop telephone.
b. Ser vice DN used for making VTRK call from Agent: Enter the
Service DN. The Service DN is a number for CS 1000 to call the
Signaling Server CDS application over a SIP Virtual Trunk. This
number can be composed of:
LOC + extension
Extension
SPN
As described in "How Converged Desktop Services works"
(page 14), upon receipt of an incoming call notification over
the AML/VAS links, the CDS application must reserve a Virtual
Trunk until the destination of the call is determined. The CDS
application instructs the Call Server to make a call to this Service
DN. The Call Server’s numbering plan directs the call to the
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 109 110

Comentarios a estos manuales

Sin comentarios