Nortel Networks NN43001-321 Manual de usuario descargar pdf (Pagina 84)

84 Conﬁguring MCS 5100

This is the HLOC + DN of the converged telephone. This number

is used for Click-to-Call in Converged Mode, and must be a UDP

number.

b. Enter 6139625573 in the Public Charge ID text box.

This is the NPA + NXX + DN of the converged telephone. It is the

caller identiﬁcation information sent on a public call. This value is

required, and may be need even in Unconverged Mode.

c. Select cdCOS from the Class of Service drop-down list.

This is the same Class of Service conﬁgured in Procedure 5

"Conﬁguring a route list" (page 75).

Note: You do not have to conﬁgure an alias, but if you do,

ensure that it does not conﬂict with the alias properties

conﬁgured in Step 3.

d. Click Save.

Set up the converged properties, as follows:

a. Click Converged Desktop properties.

The Converged Desktop Data web page opens, as shown in

Figure 35 "Provisioning Client: Converged Desktop Data" (page

84).

Figure 35

Provisioning Client: Converged Desktop Data

b. Enter 000023345573 in the Converged Desktop Alias text box.

This is the PNI + HLOC + DN of the converged telephone.

c. Enter one of the following values in the Converged Desktop

Preferred Audio Device text box:

•

If you are conﬁguring UDP, enter the Access Code (AC1 or

AC2) + HLOC + DN of the converged telephone.

Nortel Communication Server 1000

Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Conﬁguration Guide

NN43001-321 01.05 Standard

Release 5.0 15 February 2008

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 109 110

Sin comentarios

Nortel Networks NN43001-321 Manual de usuario Pagina 84