Nortel Networks V210 Manual de usuario descargar pdf (Pagina 163)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide

Verification procedures

Verifying Server1 (DBSvr/MgmtSvr/AcctMgr)

The following commands are executed on the

database/management/accounting Sun Fire V210 server using PuTTY

SSH into the machine logical IP address.

Example: Open a PuTTY SSH session to 120.120.13.22

Procedure 43 Verifying the database server

At the management pc,

1 Log into the server as nortel/<new nortel user password>

2 After the MCS Base Platform System Software installation,

execute the following command to verify IP addressing.

@mcsmicromgmt]/export/home/nortel:=> ifconfig -a

lo0:

flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4

> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000

/jointfilesconvert/38489/bge0:

flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DE

PRECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet

120.120.13.20 netmask ffffff00 broadcast 120.120.13.255

groupname imspub

/jointfilesconvert/38489/bge0:1:

flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv

4> mtu 1500 index 2 inet 120.120.13.22 netmask ffffff00

broadcast 120.120.13.255

/jointfilesconvert/38489/bge1:

flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,D

EPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu

1500 index 3 inet 120.120.13.21 netmask ffffff00 broadcast

120.120.13.255 groupname imspub

3 Look for the entry that starts with ‘/jointfilesconvert/38489/bge0.’ The parameters that

follow show the IP address, subnet mask, and whether the

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 175 176

Sin comentarios

Nortel Networks V210 Manual de usuario Pagina 163