Nortel Networks V210 Manual de usuario descargar pdf (Pagina 166)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006

166

4 Look for the entry that starts with ‘/jointfilesconvert/38489/bge1.’ The parameters that

follow show the IP address, subnet mask, and whether the

interface is ‘UP.’ This example output shows that /jointfilesconvert/38489/bge1 is

assigned to IP address 120.120.13.24, its subnet mask is ffffff00

which translates to 255.255.255.0, and the interface is UP

(active).

5 Look for the entry that starts with ‘/jointfilesconvert/38489/bge0:1.’ This is the machine

logical interface. Notice that the machine logical has ‘attached’

itself to /jointfilesconvert/38489/bge0 and added a suffix of ‘:1’ creating /jointfilesconvert/38489/bge0:1. When a

machine logical (or service logical) interface is created, the V210

will always attempt to ‘attach’ to the first interface, /jointfilesconvert/38489/bge0. If /jointfilesconvert/38489/bge0

were unavailable, or out of service, the machine logical would

then ‘attach’ itself to /jointfilesconvert/38489/bge1 creating /jointfilesconvert/38489/bge1:1. The parameters that

follow show the IP address, subnet mask, and whether the

interface is ‘UP.’

This example output shows that /jointfilesconvert/38489/bge0:1 is assigned to IP

address 120.120.13.25, its subnet mask is ffffff00, which

translates to 255.255.255.0, and the interface is UP (active).

6 Verify that the hosts file is correct:

[@microapp]/export/home/nortel:=> cat /etc/hosts

# Internet host table

127.0.0.1 localhost

120.120.13.25 microapp loghost

120.120.13.23 microapp/jointfilesconvert/38489/bge0

120.120.13.24 microapp/jointfilesconvert/38489/bge1

The first 120 address should reflect your machine logical IP

address in addition to the hostname and the ‘loghost’ tag.

The second 120 address should reflect the /jointfilesconvert/38489/bge0 interface

followed by the hostname concatenated with ‘/jointfilesconvert/38489/bge0.’

The third 120 address should reflect the /jointfilesconvert/38489/bge1 interface followed

by the hostname concatenated with ‘/jointfilesconvert/38489/bge1.’

7 Verify the defaultroute file:

[@microapp]/export/home/nortel:=> cat /etc/defaultrouter

120.120.13.1

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 175 176

Sin comentarios

Nortel Networks V210 Manual de usuario Pagina 166