Nortel-networks Nortel Secure Router 4134 Manual de usuario descargar pdf (Pagina 23)

Enabling the management LAN port 23

Figure 6

Management port on the rear panel of the Secure Router 4134

Prerequisites

•

You must be connected to the Secure Router 4134 through the console

port. See "Connecting a terminal for local access" (page 14) for

information about connecting a terminal to the console port.

•

You must log in as a user with sufﬁcient permissions to conﬁgure the

Secure Router 4134.

•

You must have the IP address and netmask that you want to assign

to the management port.

The following procedure uses Ethernet port 0/0 (on the rear of the Secure

Router 4134) for the management port. You can also use port 0/1 or port

0/2 on the front panel of the Secure Router 4134 for management purposes.

Ethernet port 0/0 is a 10/100 Base-T port. Ethernet ports 0/1 and 0/2 are

10/100/1000 Base-T ports.

Procedure steps

Step Action

1 To access conﬁguration mode, enter:

Nortel Secure Router 4134

Commissioning

NN47263-302 01.02 Standard

10.0 2 August 2007

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Sin comentarios

Nortel-networks Nortel Secure Router 4134 Manual de usuario Pagina 23