Nortel-networks Nortel Secure Router 4134 Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
7
Introduction
This document provides information about the recommended method to
commission the Secure Router 4134. For a complete list of Command Line
Interface (CLI) commands that you use to monitor and configure the Secure
Router 4134, see Nortel Secure Router 4134 Command Line Reference
(NN47263-507).
Prerequisites
Hardware installation is complete.
You must have a console cable to connect to the console port on the
rear panel of the router.
You must have an Ether net cable to connect to the management port on
the rear panel of the router.
Be familiar with using the CLI and interpreting partial configuration
procedures. See Nortel Secure Router 4134 Using the Command
Line Interface (NN47263-506).
Navigation
"Secure Router 4134 commissioning" (page 9)
"Commissioning configuration procedures" (page 13)
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 41 42

Comentarios a estos manuales

Sin comentarios