Nortel Networks BMD00007 Manual de usuario descargar pdf (Pagina 183)

Alteon OS Command Reference

The Configuration Menu

 185BMD00007, November 2007

/cfg/sys/radius

RADIUS Server Configuration

[RADIUS Server Menu]

prisrv - Set primary RADIUS server address

secsrv - Set secondary RADIUS server address

secret - Set RADIUS secret

secret2 - Set secondary RADIUS server secret

port - Set RADIUS port

retries - Set RADIUS server retries

timeout - Set RADIUS server timeout

telnet - Enable or disable RADIUS backdoor for telnet

on - Turn RADIUS authentication ON

off - Turn RADIUS authentication OFF

cur - Display current RADIUS configuration

Table 6-5 System Configuration Menu Options (/cfg/sys/radius)

Command Syntax and Usage

prisrv <IP address>

Sets the primary RADIUS server address.

secsrv <IP address>

Sets the secondary RADIUS server address.

secret <1-32 character secret>

This is the shared secret between the switch and the RADIUS server(s).

secret2 <1-32 character secret>

This is the secondary shared secret between the switch and the RADIUS server(s).

port <RADIUS port configure, default 1645>

Enter the number of the UDP port to be configured, between 1500 - 3000. The default is 1645.

retries <RADIUS server retries (1-3)>

Sets the number of failed authentication requests before switching to a different RADIUS server.

The default is 3 requests.

timeout <RADIUS server timeout seconds (1-10)>

Sets the amount of time, in seconds, before a RADIUS server authentication attempt is considered

to have failed. The default is 3 seconds.

telnet disable|enable

Enables or disables the RADIUS backdoor for telnet. The telnet command also applies to

SSH/SCP connections and the Browser-Based Interface (BBI). The default is disabled.

To obtain the RADIUS backdoor password for your GbESM, contact your IBM Service and

Support line.

Enables the RADIUS server.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 389 390

Sin comentarios

Nortel Networks BMD00007 Manual de usuario Pagina 183