Nortel Networks BMD00007 Manual de usuario descargar pdf (Pagina 231)

Alteon OS Command Reference

The Configuration Menu

 233BMD00007, November 2007

/cfg/l2/stg <STP group number>/brg

Spanning Tree Bridge Configuration

Spanning Tree bridge parameters affect the global STG operation of the switch. STG bridge

parameters include:

 Bridge priority

 Bridge hello time

 Bridge maximum age

 Forwarding delay

 Bridge aging time

[Bridge Spanning Tree Menu]

prior - Set bridge Priority [0-65535]

hello - Set bridge Hello Time [1-10 secs]

mxage - Set bridge Max Age (6-40 secs)

fwd - Set bridge Forward Delay (4-30 secs)

aging - Set bridge Aging Time (1-65535 secs, 0 to disable)

cur - Display current bridge parameters

Table 6-38 Spanning Tree Bridge Menu Options (/cfg/l2/stg/brg)

Command Syntax and Usage

prior <new bridge priority (0-65535)>

Configures the bridge priority. The bridge priority parameter controls which bridge on the network

is the STG root bridge. To make this switch the root bridge, configure the bridge priority lower

than all other switches and bridges on your network. The lower the value, the higher the bridge pri-

ority. The range is 0 to 65535, and the default is 32768.

RSTP/MSTP: The range is 0 to 61440, in steps of 4096 (0, 4096, 8192...), and the default

is 32768.

hello <new bridge hello time (1-10 secs)>

Configures the bridge hello time.The hello time specifies how often the root bridge transmits a

configuration bridge protocol data unit (BPDU). Any bridge that is not the root bridge uses the root

bridge hello value. The range is 1 to 10 seconds, and the default is 2 seconds.

This command does not apply to MSTP (see CIST on page 227).

mxage <new bridge max age (6-40 secs)>

Configures the bridge maximum age. The maximum age parameter specifies the maximum time

the bridge waits without receiving a configuration bridge protocol data unit before it re configures

the STG network. The range is 6 to 40 seconds, and the default is 20 seconds.

This command does not apply to MSTP (see CIST on page 227).

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 389 390

Sin comentarios

Nortel Networks BMD00007 Manual de usuario Pagina 231