Nortel Networks BMD00007 Manual de usuario descargar pdf (Pagina 267)

Alteon OS Command Reference

The Configuration Menu

 269BMD00007, November 2007

/cfg/l3/rip/if <interface number>

Routing Information Protocol Interface Configuration

The RIP Menu is used for configuring Routing Information Protocol parameters. This option is

turned off by default.

NOTE – Do not configure RIP1 parameters if your routing equipment uses RIP version 2.

[RIP Interface 1 Menu]

version - Set RIP version

supply - Enable/disable supplying route updates

listen - Enable/disable listening to route updates

poison - Enable/disable poisoned reverse

split - Enable/disable split horizon

trigg - Enable/disable triggered updates

mcast - Enable/disable multicast updates

default - Set default route action

metric - Set metric

auth - Set authentication type

key - Set authentication key

enable - Enable interface

disable - Disable interface

current - Display current RIP interface configuration

Table 6-68 RIP Interface Menu Options (/cfg/l3/rip/if)

Command Syntax and Usage

version 1|2|both

Configures the RIP version used by this interface. The default value is version 1.

supply disable|enable

This command is disabled by default. When enabled, the switch supplies routes to other routers.

listen disable|enable

This command is disabled by default. When enabled, the switch learns routes from other routers.

poison disable|enable

This command is disabled by default. When enabled, the switch uses split horizon with poisoned

reverse. When disabled, the switch uses only split horizon.

split disable|enable

Enables or disables split horizon.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 389 390

Sin comentarios

Nortel Networks BMD00007 Manual de usuario Pagina 267