Nortel Networks Server 1005r Manual de usuario Pagina 107

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 106
June 2007 Replacing basic chassis components
1005r Server Maintenance and Diagnostics 107
1 Loosen the captive screws (A) on both sides of the front bezel. The
screws cannot be removed from the front bezel. Refer to Figure 16
on page 106.
2 Hold the front bezel by the captive screws and lift it toward you.
Place it in a secure location while you service the server.
To replace the front bezel
When the CallPilot server maintenance is complete, replace the front
bezel.
1 Align the captive screws on the front bezel with the threaded holes
in the front panel.
2 Tighten the captive screws.
.
CAUTION
Risk of equipment damage
Support the front bezel while loosening the captive screws as
the front bezel is not held onto the front panel with another
mechanism.
Vista de pagina 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 205 206

Comentarios a estos manuales

Sin comentarios