Nortel-networks NN43001-563 Manual de usuario Pagina 459

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 458
459
Appendix F
Configure a Netgear RM356 modem
router for remote access
Contents
This section contains information on the following topics:
"Introduction" (page 459)
"Security features of the RM356 modem router" (page 460)
"Install the RM356 modem router" (page 460)
"Configure the OTM PC to communicate with a remote system site through a
modem router" (page 461)
"Configure the RM356 modem router through the manager menu" (page 461)
"RM356 modem router manager menu (application notes on the ELAN subnet
installation)" (page 465)
Introduction
Management and support of the IP Trunk 3.01 (and later) network depends
on IP networking protocols including SNMP, FTP, and Telnet. A modem
router should be installed on the system site ELAN subnet to provide remote
support access for ITG and other IP-enabled Nortel products. The Nortel
Netgear RM356 modem router integrates the functions of a V.90 modem, a
PPP remote access server, an IP router, and a 4-port 10BaseT Ethernet
hub, and provides a range of security features that can be configured to
comply with the customer’s data network security policy.
Do not install a modem router on the ELAN subnet without the explicit
approval of the customer’s IP network manager. The RM356 modem router
is not secure unless it is configured correctly, according to the customer’s
network security policy and practices.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.
Vista de pagina 458
1 2 ... 454 455 456 457 458 459 460 461 462 463 464 ... 489 490

Comentarios a estos manuales

Sin comentarios