Nortel Networks NN43001-301 Manual de usuario Pagina 224

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 306
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 223
224 1.5 Mb DTI implementation
4
Assign clock’s reference source. See "LD 73 - Assigning a clock
reference source" (page 225).
—End—
LD 17 - Adding a DTI card
Prompt Response Description
REQ CHG Change existing data.
TYPE CFN Configuration data block.
...
PARM YES
...
PCML (MU) A System PCM law.
Default is MU law.
...
CEQU YES Changes to common equipment.
DLOP ll dd ff Digital Trunk Interface Loop or Loops
MODE TRK Select Digital Trunk Interface mode.
TMDI (YES) NO Whether the card is a TMDI card.
YALM DG2 (FDL) Yellow alarm method prompted only if the frame format
is ESF Must match the far end.
Use FDL with ESF and use DG2 with non-ESF. If not
prompted then DG2 is set automatically.
TRSH
0-15
The maintenance and threshold table to be used for this
DTI card, as configured in LD 73.
T1TE
012
T1 Transmit Equalization (0=0-200 ft., 1=200-400 ft,
2=400-700 ft). Only for TMDI = YES.
LD 16 - Configuring a DTI trunk route
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route data block.
TKTP Create a trunk route.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.
Vista de pagina 223
1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 305 306

Comentarios a estos manuales

Sin comentarios