Nortel-networks Sun Fire V100 Manual de usuario descargar pdf (Pagina 160)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006

160

Logical IP Address of each server. If running

simplex, provide the same address twice.”

2 Press Enter to continue.

3 You will see the following message: "Enter the machine

logical IP address of the management server."

Enter the <machine logical IP of the management

server>[Enter]

Example : 192.168.14.11

4 You will see the following message: "Enter the machine

logical IP address of the accounting server."

Enter the <machine logical IP of the accounting

server>[Enter]

Example : 192.168.14.11

5 You will see the following message:

You have chosen to configure NTP as follows:

Type of server: Application

NTP SOURCE (Management IP address): <machine

logical IP address>

Type of server: Application

NTP SOURCE (Accounting IP address): <machine

logical IP address>

Is the above configuration correct (y/n):

Press Y to accept or N to change.

Wait until you see the following message:

You are now configuring IPMP (Multipathing).

Please have the Application Servers (Appsvr,

IPCM, WebSvr, WebClientMgr) Physical IP

addresses and the Machine Logical IP address

ready. Have 6 IP addresses that can be used as

ping buddies. Recommendations for ping buddies

are provided.

6 Press Enter to continue.

7 When you see the IP multipathing configuration for Sun Solaris

information appear, press Enter to accept it or type in a

preferred setting. The default failover timeout is set to

1000mSec.

8 Enter the primary machine physical IP address for the dmfe0

interface: <Physical IP address of the dmfe0

interface of the physical server you are

installing> [Enter]

Example: 192.168.14.12

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 191 192

Comentarios a estos manuales

Sin comentarios

Nortel-networks Sun Fire V100 Manual de usuario Pagina 160

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Nortel-networks Sun Fire V100