Nortel-networks Sun Fire V100 Manual de usuario descargar pdf (Pagina 171)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

171

1500 index 3 inet 120.120.12.33 netmask ffffff00 broadcast

120.120.12.255 groupname imspub

3 Look for the entry that starts ‘/jointfilesconvert/1299869/bge0.’ The parameters that follow

show the IP address, subnet mask, and whether the interface is

‘UP.’ This example output shows that /jointfilesconvert/1299869/bge0 is assigned to IP

address 120.120.12.32, its subnet mask is ffffff00 which

translates to 255.255.255.0, and the interface is UP (active).

4 Look for the entry that starts ‘/jointfilesconvert/1299869/bge1.’ The parameters that follow

show the IP address, subnet mask, and whether the interface is

‘UP.’ This example output shows that /jointfilesconvert/1299869/bge1 is assigned to IP

address 120.120.12.33, its subnet mask is ffffff00 which

translates to 255.255.255.0, and the interface is UP (active).

5 Look for the entry that starts ‘/jointfilesconvert/1299869/bge0:1.’ This is the machine logical

interface. Notice that the machine logical has ‘attached’ itself to

/jointfilesconvert/1299869/bge0 and added a suffix of ‘:1’ creating /jointfilesconvert/1299869/bge0:1. When a machine

logical (or service logical) interface is created, the 240 will

always attempt to ‘attach’ to the first interface, /jointfilesconvert/1299869/bge0. If /jointfilesconvert/1299869/bge0 were

unavailable, or out of service, the machine logical would then

‘attach’ itself to /jointfilesconvert/1299869/bge1 creating /jointfilesconvert/1299869/bge1:1. The parameters which

follow show the IP address, subnet mask, and whether the

interface is ‘UP.’

This example output shows that /jointfilesconvert/1299869/bge0:1 is assigned to IP

address 120.120.12.31, its subnet mask is ffffff00, which

translates to 255.255.255.0, and the interface is UP (active).

6 Verify that the hosts file is correct.

[@mcsappsvr]/export/home/nortel:=> cat

/etc/hosts

# Internet host table

127.0.0.1 localhost

120.120.12.31 rmcsappsvr loghost

120.120.12.32 mcsappsvr/jointfilesconvert/1299869/bge0

120.120.12.33 mcsappsvr/jointfilesconvert/1299869/bge1

The first 120 address should reflect your machine logical IP

address in addition to the hostname and the ‘loghost’ tag.

The second 120 address should reflect the /jointfilesconvert/1299869/bge0 interface

followed by the hostname concatenated with ‘/jointfilesconvert/1299869/bge0.’

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 191 192

Sin comentarios

Nortel-networks Sun Fire V100 Manual de usuario Pagina 171