Nortel-networks Sun Fire V100 Manual de usuario descargar pdf (Pagina 168)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006

168

Gatekeeper. This value is added to the SIP URI and is

required for the MCS 5100 H.323 Gatekeeper to route calls

to the appropriate H.323 endpoint. In this example, the

gateway is

Example

Gateway host:

enterprise.com;maddr=47.104.11.195:5070;h

323_endpoint=Harry-GW1

Gateway type: Harry-GW1-on-gatekeeper3

6 Calls can now route to and from the SIP applications and H.323

Gatekeeper and endpoints.

7 At this point administrators should configure their dialing plan

support.

Verification procedures

Sun Fire V100 H.323 Gatekeeper server verification

The following commands are executed on the AppSvr V100 using

PuTTY SSH into the machine logical IP address.

Example: Open a PuTTY SSH session to 120.120.12.34

Procedure 49 Verifying the H.323 Gatekeeper

At the management pc,

1 Log into the server as nortel/<new nortel user password>.

2 After installing the MCS Base Platform System Software CDs

1-6, execute the following command to verify IP addressing.

@mcsappsvr]/export/home/nortel:=> ifconfig -a

lo0:

flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>

mtu 8232 index 1 inet 127.0.0.1 netmask ff000000

dmfe0:

flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEP

RECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet

120.120.12.32 netmask ffffff00 broadcast 120.120.12.255

groupname imspub

dmfe0:1:

flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4

> mtu 1500 index 2 inet 120.120.12.34 netmask ffffff00

broadcast 120.120.12.255

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 191 192

Sin comentarios

Nortel-networks Sun Fire V100 Manual de usuario Pagina 168