Nortel-networks Sun Fire V100 Manual de usuario descargar pdf (Pagina 26)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006

Figure 6 Sun Fire V100 server network callouts

Note 1: If the network is down, or the server needs to be

configured or restarted, use the console port A.

By default from manufacturing, serial port A is the only active

serial port.

Note 1: The cables with part numbers A0500465 or

NTVW01IM are serial cables.

Note 2: The P1 end goes to the V100 server and the P2 end

goes to the MRV terminal server.

Figure 7 P1 and P2 custom cable connections to terminal server

See note

Note: This cable is only connected in order to configure the terminal server.

Following configuration, remove the cable.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 191 192

Sin comentarios

Nortel-networks Sun Fire V100 Manual de usuario Pagina 26