Nortel-networks Sun Fire V100 Manual de usuario descargar pdf (Pagina 50)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006

Enter the <machine logical IP of the management

server>[Enter]

Example : 192.168.14.11

4 You will see the following message: "Enter the machine

logical IP address of the accounting server."

Enter the <machine logical IP of the accounting

server>[Enter]

Example : 192.168.14.11

You will see the following message: You have chosen to

configure NTP as follows:

Type of server: Application

NTP SOURCE (Management IP address): 192.168.14.11

Type of server: Application

NTP SOURCE (Accounting IP address): 192.168.14.11

Is the above configuration correct (y/n):

Select Y to continue or N to change.

5 Press Enter to continue.

6 You will see the following statement:

”You are now configuring IPMP (Multipathing)"

”Please have the Database Server Physical IP

addresses and the Machine Logical IP address

ready. Have 6 IP addresses that can be used as

ping buddies."

7 Press the Enter key to continue.

8 When you see the IP multipathing configuration for Sun Solaris

information appear, press Enter to accept it or type in a preferred

setting. The default failover timeout is set to 1000mSec.

9 Enter the primary machine physical IP address for the dmfe0

interface: <Physical IP address of the dmfe0

interface of the Database Server> [Enter]

Example: 192.168.14.12

10 Enter the secondary machine physical IP address for the dmfe1

interface:

<Physical IP address of the dmfe1 interface of

the Database Server> [Enter]

Example: 192.168.14.13

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 191 192

Sin comentarios

Nortel-networks Sun Fire V100 Manual de usuario Pagina 50