Nortel Networks 8672ATME Manual de usuario descargar pdf (Pagina 127)

Chapter 6 Configuring the Passport 8672ATME Module 127

Using the Passport 8672ATME Module

5 Click Insert.

The Insert ATM 1483 ELAN dialog box closes, and the ATM 1483 ELAN tab

is redisplayed.

6 Click Close.

Bridging point-to-point traffic using an ATM 1483 PVC using

the CLI

To configure the Passport 8672ATME Module for ATM 1483 PVCs for VLANs

bridged across an ATM PVC network, using the CLI:

1 To create a VLAN by port, enter:

config vlan 2 create byport 1

2 To add an ATM port (in this example, 1/1) and several Ethernet ports (in this

example, 3/40 to 3/48) to the VLAN, enter:

config vlan 2 port add 1/1, 3/40-3/48

3 To configure an ATM 1483 PVC for null-encapsulation and ubr, enter:

config atm 1/1 pvc create 0.100 enc 1483-null serv

ubr

Alternatively, to configure an ATM 1483 PVC for null-encapsulation and vbr,

enter:

config atm 1/1 pvc create 0.100 enc 1483-null serv

vbr<PCR value>scr<SCR value> mbs<MBS value>

4 To associate the ATM 1483 bridged PVC with a VLAN, enter:

config atm 1/1 pvc 1483 bridged create 2 0.100,

0.101

Bridging point-to-multipoint traffic using an ATM 1483 PVC

using Device Manager

In the configuration shown in Figure 54, the Passport 8672ATME Module is

configured as a bridging hub to spokes through the WAN. Bridging is not allowed

between PVCs in the same ELAN. For point-to-multipoint bridging, the end

stations connected by each PVC circuit cannot communicate with one another.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 161 162

Sin comentarios

Nortel Networks 8672ATME Manual de usuario Pagina 127