
Chapter 4 Managing the Passport 8672ATME Module with Device Manager 67
Using the Passport 8672ATME Module
5 In the VlanId field, type the VLAN ID.
6 In the PvcIds field, type the PVC ID.
7 In the ConnectType field, select the type of routing protocol: bridged, ip, or
ipx.
8 If bridged is selected in the ConnectType field, click Insert.
9 If Ip is selected in the ConnectType field, complete the following fields:
a In the LocalIpAddress field, type the IP address of the device.
b In the RemoteIpAddress field, type the IP address of the device that you
are connecting to in the 1483 ELAN.
c Select the InArpSendEnable option to enable Arp packets.
d In the InArpSendInterval field, type the time interval between 0 and 60
seconds.
e Click Insert.
Figure 22 shows the relevant fields for IP routing.
Note: For <vpi.vci>, 0.0 is not supported.
Comentarios a estos manuales