
84 Chapter 5 Managing the Passport 8672ATME Module with the CLI
209195-B
Table 21 config atm pvc 1483 ipx command parameters and variables
config atm info command
Figure 29 shows a sample of the output resulting from executing the config atm
info
command.
Figure 29 Sample output for the config atm info command
Parameters and variables Description
create <vid> <vpi.vci> <ipx> Creates a routed 1483 IPX circuit on the specified VLAN to the
specified remote router interface. The optional parameters are:
• vid means VLAN ID number.
• vpi.vci means circuit VPI number and the circuit VCI numbers,
respectively; they are separated by a period.
• ipx is the IPX Network number of the remote router interface. If this
number is not given, the first IPX Network number configured for
the specified VLAN is used.
Note that the VLAN ID must be previously configured for IPX on this
port.
No ARP functionality is available on this IPX segment.
delete <vid> Deletes the routed 1483 IPX circuit on the specified VLAN.
info Displays information on routed 1483 IPX circuits.
number-vpi-bits : 4
scrambling : Enable
framing-mode : SONET
clock-source : Free Running
loop-back-mode : off
state : up
Comentarios a estos manuales