
Common Tops log messages (0202) DNC Logs 31
TOPS VSN Log and alarm messages
0003/0094
Message:
[PRU_name] received an IO error (Bad_Comm_Addr) on path
[file/directory_path name]. The error was the result of specifying an invalid site
address.
Description:
The PRU encountered an error during an IO operation on the
file or directory. The operation was not performed. It is the responsibility of the
PRU performing the operation to recover from the error and to retry the
operation. If it is unable to do so, then it can declare itself faulty.
Action:
If the PRU is in the working state, no action is required. If the PRU is
in the faulty state, then reboot the PRU. If the problem persists, then reboot
the server which handles the IO operation. If neither reboot operations are
successful, then reboot the whole system. Document the problem, record all
action taken, and then contact NT.
0003/0095
Message:
[PRU_name] received an IO error (Bad_Comm_Msg) on path
[file/directory_path name]. The error was the result of a protocol error between
communication servers.
Description:
The PRU encountered an error during an IO operation on the
file or directory. The operation was not performed. It is the responsibility of the
PRU performing the operation to recover from the error and to retry the
operation. If it is unable to do so, then it can declare itself faulty.
Action:
If the PRU is in the working state, no action is required. If the PRU is
in the faulty state, then reboot the PRU. If the problem persists, then reboot
the server which handles the IO operation. If this action doesn't correct the
problem, reboot the SRU. If the PRU is still faulty, then reboot the whole
system. Document the problem, record all action taken, and then contact NT.
0003/0096
Message:
[PRU_name] received an IO error (Comm_Link_Failure) on path
[file/directory_path name]. The error was the result of failure in communications
between sites.
Description:
The PRU encountered an error during an IO operation on the
file or directory. The operation was not performed. It is the responsibility of the
PRU performing the operation to recover from the error and to retry the
operation. If it is unable to do so, then it can declare itself faulty.
Action:
If the PRU is in the working state, no action is required. If the PRU is
in the faulty state, then reboot the PRU. If the problem persists, then reboot
the server which handles the IO operation. If this action doesn't correct the
problem, reboot the SRU. If the PRU is still faulty, then reboot the whole
system. Document the problem, record all action taken, and then contact NT.
0003/0097
Message:
[PRU_name] received an IO error (Remote_Site_Failure) on path
[file/directory_path name]. The error was the result of a failure of the server at
the remote site.
Description:
The PRU encountered an error during an IO operation on the
file or directory. The operation was not performed. It is the responsibility of the
PRU performing the operation to recover from the error and to retry the
operation. If it is unable to do so, then it can declare itself faulty.
Comentarios a estos manuales