Nortel Networks VSN04 Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
42 Common TOPS VSN log messages (020A)
TOPS VSN Log and alarm messages
0001/0004
Message:
[PRU_name] tried to locate [name] with the name server but failed.
[Two 80 character lines of optional data.]
Description:
The PRU could not find the name of the PRU or task it was
trying to locate using the name server facility. The PRU does not necessarily
have to declare itself faulty; it can communicate using other means. This log
indicates one of two problems: trouble with the name server, or that the PRU or
task does not exist.
Action:
If the entity exists make sure that it's state is "working". If the PRU or
task does exist, reboot it. If this action is unsuccessful, then reboot the SRU in
which the PRU resides. If the problem persists reboot the entire machine.
Document the problem, record all action taken, and then contact NT.
0001/0005
Message:
[PRU_name] tried to register with the DVS Resource Manager and
failed. Return code = [defined_below]. [Two 80 character lines of optional
data.]
Description:
When the PRU tries to register its name with the DVS Resource
Manager, a return code indicates the nature of the failure. Return codes are:
invalid address or not present, or Reg-Operation parameter is out of range.
Action:
When the return code indicates failure to communicate with the DVS
Resource Manager, reboot the PRU. If this action is unsuccessful, then reboot
the entire machine. Document the problem, and record all action taken. If the
problem persists, then contact NT.
0001/0006
Message:
[PRU_name] tried to perform an "rm_Request" with the DVS
Resource Manager and failed. Return code = [DVS_code]. [Two 80 character
lines of optional data.]
Description:
The PRU tried to perform a request with the DVS Resource
Manager but failed. The return code indicates the reason.
Action:
When the return code indicates failure to communicate with the DVS
Resource Manager, then reboot the PRU. If this action is unsuccessful, then
reboot the entire machine. Document the problem, and record all action taken.
If the problem persists, then contact NT.
0001/0007
Message:
[PRU_name] could not free memory. User action is required. [Two
80 character lines of optional data.]
Description:
The PRU or task was unable to perform because it could not
free enough memory.
Action:
Courtesy down the PRU, then return it to service. If this action does
not solve the problem, then reboot the SRU. Document the problem, and
record all action taken. If the problem persists, then contact NT.
0001/0020
Message:
[PRU_name] was attempting to perform an SDM "Init" and failed.
Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of
optional data.]
Description:
When the PRU tries to initialize the Service Data Manager it fails.
Class error codes are: 1) run error, 2) task error, and 3) IO error.
Action:
This log should never occur. If it does, contact NT immediately.
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

Comentarios a estos manuales

Sin comentarios