Nortel Networks VSN04 Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
49
TOPS VSN Log and alarm messages
9. Voice interface resource manager
log messages - 0220
0000/0000
Message:
Error encountered attempting to load DTMF patterns. The symbol
[symbol] is referenced in the table [table_name] but not found in the table
[table_name].
Description:
Applications can not access the VIs because of a reference
error in an SDM table. This table can not be accessed by the user.
Action:
Contact NT to correct the problem.
0000/0001
Message:
Error encountered attempting to load DTMF patterns.
Description:
Applications can not access the VIs because of a reference
error in an SDM table. This table can not be accessed by the user.
Action:
Contact NT to correct the problem.
0000/0002
Message:
VIRM has been unable to load DTMF patterns. The specific
problem encountered is described in another log.
Major
Description:
The Voice Interface Resource Manager could not load an SDM
table. Either the previous, but usually the log immediately following this one,
identifies the specific problem.
Action:
The problem identified in the qualifying log must be corrected.
When corrected, the VIRM must be reload. The alarm clears once this is done.
0000/0003
Message:
Any outstanding alarms generated by the VIRM have been cleared.
Description:
This log is generated every time the VIRM PRU is brought into
service. There may not be any outstanding alarms when the VIRM is brought
into service.
Action:
No action.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 89 90

Comentarios a estos manuales

Sin comentarios