Nortel Networks 10BASE-T Manual de usuario descargar pdf (Pagina 114)

Using the BayStack 410-24T 10BASE-T Switch

1-84

309985-C Rev 00

In the configuration example shown in Figure 1-51, the designated monitor port

(port 23) can be set to monitor traffic in any of the following modes:

• Monitor all traffic received by port X.

• Monitor all traffic transmitted by port X.

• Monitor all traffic received and transmitted by port X.

• Monitor all traffic received by port X or transmitted by port Y.

• Monitor all traffic received by port X (destined to port Y) and then transmitted

by port Y.

• Monitor all traffic received/transmitted by port X and received/transmitted by

port Y (conversations between port X and port Y).

As shown in the Port Mirroring Configuration screen example (Figure 1-52

), port

23 is designated as the Monitor Port for ports 24 and 25 in switch S1.

The Monitoring Mode field [ - > Port X or Port Y - > ] indicates that all traffic

received by port X or all traffic transmitted by port Y is currently being monitored

by the StackProbe attached to Monitor port 23.

The screen data displayed at the bottom of the screen shows the currently active

port mirroring configuration.

Note:

The Unit value (in the Unit/Port field) cannot be configured when the

switch is operating standalone.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 329 330

Sin comentarios

Nortel Networks 10BASE-T Manual de usuario Pagina 114