Nortel Networks 10BASE-T Manual de usuario descargar pdf (Pagina 50)

Using the BayStack 410-24T 10BASE-T Switch

1-20

309985-C Rev 00

You can attach a probe device (such as a Nortel Networks StackProbe, or

equivalent) to the designated monitor port.

For more information about the port mirroring feature, see “P

ort Mirroring

(Conversation Steering)” on page 1-82.

BootP Automatic IP Configuration/MAC Address

The BayStack 410-24T switch has a unique 48-bit hardware address, or MAC

address, that is printed on a label on the back panel. You use this MAC address

when you configure the network BootP server to recognize the BayStack 410-24T

switch BootP requests. A properly configured BootP server enables the switch to

automatically learn its assigned IP address, subnet mask, IP address of the default

router (default gateway), and software image file name.

When the switch is participating in a stack configuration, a Stack MAC address is

assigned automatically during the stack initialization. The base unit’s MAC

address, with an offset, is used for the Stack MAC address.

For example, if the base unit’s MAC address is:

00-00-82-99-44-00

and the offset is:

then the Stack MAC address becomes:

00-00-82-99-44-1F

If another unit in the stack is assigned as the base unit, the MAC address of the

new base unit (with offset) now applies to the stack configuration. The original

stack IP address still applies to the new base unit.

For an example of a BootP configuration file, see Appendix F, “

Sample BootP

Configuration File.”

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 329 330

Sin comentarios

Nortel Networks 10BASE-T Manual de usuario Pagina 50