Nortel Networks 10BASE-T Manual de usuario Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 330
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Introduction to the BayStack 410-24T Switch
309985-C Rev 00
1-45
To connect multiple VLANs across switches with redundant links, the STP must
be disabled on all participating switch ports. Figure 1-24
shows possible
consequences of enabling the STP when using VLANs between untagged
(non-802.1Q tagged) switches.
Figure 1-24. Possible Problems with VLANs and Spanning Tree Protocol
As shown in Figure 1-24, with STP enabled, only one connection between S1 and
S2 is forwarding at any time. Communications failure occurs between VLAN 2 of
S1 and VLAN 2 of S2, blocking communications between Stations A and B.
The link connecting VLAN 1 on Switches S1 and S2 is selected as the forwarding
link based on port speed, duplex mode, and port priority. Because the other link
connecting VLAN 2 is placed into Blocking mode, stations on VLAN 2 in switch
S1 cannot communicate with stations in VLAN 2 on switch S2. With multiple
links only one link will be forwarding.
S2
S1
VLAN 1 VLAN 2
VLAN 1 VLAN 2
Blocking
Station A
No
Communications
Station B
Forwarding
Non-802.1Q
tagged switch
BS41022A
Non-802.1Q
tagged switch
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 329 330

Comentarios a estos manuales

Sin comentarios