Nortel Networks 10BASE-T Manual de usuario descargar pdf (Pagina 143)

309985-C Rev 00

3-1

Chapter 3

Using the Console Interface

This chapter describes how to configure and manage the BayStack 410-24T

switch using the menu-driven console interface (CI).

This chapter covers the following topics:

• Accessing the CI menus and screens

• Using the CI menus and screens

• Description of options available from the main menu

You can access the CI menus and screens locally through a console terminal,

remotely through a dial-up modem connection, or in-band through a TELNET

session (see “Console/Comm Port

” on page 2-10).

You can also manage the BayStack 410-24T switch using Nortel Networks

Optivity network management software or any generic SNMP-based management

software; however, certain parameters such as the switch IP address, or stack IP

address, if configured, must be supplied for the switch management function to

become fully operational (see “Initial Setup

” on page page 2-17).

For information about SNMP, see your network management documentation.

Note:

If your stack configuration includes one or more Business Policy

Switches, you must use the Business Policy Switch console interface to

configure or monitor your stack.

Note:

If you have a properly configured BootP server in your network, it will

detect the IP address; you will not need to configure the IP address.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 329 330

Sin comentarios

Nortel Networks 10BASE-T Manual de usuario Pagina 143