Nortel Networks NN44200-313 Manual de usuario descargar pdf (Pagina 13)

CS 1000/M1 system status check

This task describes how to check the Communication Server 1000 (CS

1000) or the Meridian 1 (M1) system status.

To successfully install a basic CallPilot system, you must provision or verify

the following parameters on the telephony switch (CS 1000 or M1):

•

PBX IP and host name

•

VAS ID

•

ELAN ID

• system parameters

•

ACD

•

DFDN

• CDN

•

ACD agents

•

telephones

CallPilot can be provided only on a per-customer basis on the CS 1000

or M1 system. ELAN messages used for communication between the

telephony switch and CallPilot contain a customer number to which CallPilot

belongs. In these procedures, ensure that you enter the correct customer

number in the overlays.

CS 1000/M1 system status check tasks

The following is a list of tasks you perform to check the status of the CS 1000

or M1 system. To link to detailed procedures for each task, click the text.

•

"Checking the current IP address of the PBX (LD 117)" (page 14)

•

"Checking the currently conﬁgured VAS IDs" (page 14)

•

"Checking the ELAN interface status of the PBX (LD 137)" (page 15)

•

"Enabling the ELAN interface of the PBX (LD 137)" (page 15)

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.0 19 May 2008

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Sin comentarios

Nortel Networks NN44200-313 Manual de usuario Pagina 13