Nortel Networks NN44200-313 Manual de usuario descargar pdf (Pagina 19)

Conﬁguring system parameters (LD 17) 19

Prompt Response Notes

ELAN

Enter the number entered for

the ELAN ID above.

SECU YES

To exit the overlay, enter ****.

Tech tip: To view the new ELAN, enter LD 22. Enter PRT at the REQ

prompt, then ADAN. A list of all provisioned IDs appears. Use the

capture text function in hyperterminal to save a text ﬁle of the output.

—End—

Conﬁguring system parameters (LD 17)

Tech tip: To view a list of all provisioned system parameters, enter LD 22

and enter PRT at the REQ prompt, then CFN. Use the capture text function

in hyperterminal to save a text ﬁle of the output.

Step Action

1 Connect to the PBX.

Enter LD 17.

Enter the appropriate values as described in the following table.

For prompts not listed in the following table, press Enter to accept

the default.

Table 4

LD 17 - Conﬁguring system parameters

Prompt Response Notes

REQ CHG

TYPE PARM

NCR

xxx

Enter the number of DS0

channels multiplied by 2 plus

the current NCR.

For example, if the current NCR

is 500 and there are 24 DS0

channels, enter 548.

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.0 19 May 2008

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 65 66

Sin comentarios

Nortel Networks NN44200-313 Manual de usuario Pagina 19