Nortel Networks DMS/MSL-100 Manual de usuario descargar pdf (Pagina 33)

Symposium and DMS/MSL-100 Switch Guide 33

April 2004 Getting started

! Install the network cable from the router to the Channel Service Unit (CSU)

or any other transport device.

! Install the client CSU.

! Configure the connection between the DMS CSU and the client CSU.

! Configure the connection between the DMS CSU and the client router and

firewall.

! Configure the connection between the client router and firewall, and the

client applications (for example, IVR system, Windows 2000 Server, and

Symposium Call Center Server).

! Configure the client-side router and firewall.

Installing and configuring the EIU

To install and configure the EIU, you must perform these tasks on the switch:

! Install the EIU on the switch.

! Confirm the EIU is present and lists all entries as displayed in table

LIUINV.

! Configure an IP address for the switch in table IPNETWRK.

! Configure IP addresses for the EIU in table IPHOST.

! Configure the EIU in table IPTHRON.

For more information, refer to the Ethernet Interface Unit User Guide

(NTP 297-8991-910) and the ICM Router Guide (NTP 297-2233-903).

Installing and configuring ICM

To install and configure ICM, you must ensure that the following tasks have

been performed on the switch:

! Install ICM on the EIU.

! Configure the office parameters in the following table:

OFCENG Allocates resources for switch activities.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 143 144

Sin comentarios

Nortel Networks DMS/MSL-100 Manual de usuario Pagina 33